Installation and Precautions for Fresh Workbench

Installation Instructions:
First of all, since the preservation workbench is a combination of refrigerator and operating table, it needs to be static for 2~3 hours during the first installation. Because the refrigerator in the handling process by the bumps, will make the compressor inside the lubricant with the refrigerant flow to the system at all locations, this time power work will cause poor lubrication of the compressor, shorten the life of the compressor, so need to be left 2 ~ 3 hours, so that the lubricant flows back to the compressor by itself.

Precautions:
1, the use of first carefully read the instruction manual.
2, in the power supply, after an hour of operation, after confirming the cabinet cooling before use, food storage need to confirm the stored food is suitable for the temperature of the product.
3, food shelf load-bearing 35 kg, food and the inner wall must leave a gap of more than 5 cm (storage items to 70% as a limit), to ensure that the cabinet cool air normal circulation.
4, please do not put hot food directly into the food must wait until the food is cool, to prevent the quality of food stored around the decline.